|
|
 |
 DL07
UNDERWATER DRILL
Stanley's DL07 can be used for wood, metal and masonry. The reliable
HYREVZ gear type motor has been proven in tens of thousands of applications.
The compact DL07 uses a standard 1/2" 12.7mm Jacobs chuck. With
the high torque generated by the internal HYREVZ motor the DL07 can
handle wood, metal or masonry with the correct bits. The large feathering
trigger is convenient to use and gives the operator complete control
of the drill speed. For operator comfort, the DL07 handle is coated
with a heat insulated, shock absorbing material
The DL07 is designed to run off a HTMA
type II hydraulic circuit. Designed for heavy duty operations, it can
be used by divers in any position.
| SPECIFICATIONS |
| ITEM |
U.S.A. |
METRIC |
| CHUCK CAPACITY |
1/2 in |
12.7 mm |
| WEIGHT |
6 lbs |
2/7 kg |
| LENGTH |
9 in |
22.9 cm |
| WIDTH |
3.5 in |
89 mm |
| MOTOR |
Stanley Hyrevz
gear |
| INPUT FLOW RANGE |
See Table
Below |
| INPUT PRESSURE |
2000 psi |
140 bar |
| MAX. BACK PRESSURE |
250 psi |
17 bar |
| OPTIMUM FLOW |
14 gpm |
53 lpm |
| PORTING |
8 SAE O-ring |
| CONNECTOR |
3/8 in. Male
Pipe Hose Ends |
| SPINDLE SPEED |
See Table
Below |
|
DL07 TORQUE AND DRILL SPEEDS
|
|
Torque (proportional to oil pressure)
|
Drill Speed (proportional to oil flow)
|
| U.S.A. |
Metric |
Hydraulic Flow |
Drill Speed |
| 4 ft-lb @ 500 psi |
0.5 Nm @ 35 bar |
3 gpm (11.3 lpm) |
350 rpm |
| 9 ft-lb @ 1000 psi |
1.2 Nm @ 70 bar |
4 gpm (15 lpm) |
475 rpm |
| 14 ft-lb @ 1500 psi |
1.9 Nm @ 105 bar |
6 gpm (23 lpm) |
750 rpm |
| 19 ft-lb @ 2000 psi |
2.6 Nm @ 140 bar |
8 gpm (30 lpm) |
1000 rpm |
| |
|
10 gpm (38 lpm) |
1250 rpm |
|
MODEL NUMBERS
|
| DL07652 |
Underwater Drill,
Dual Spool, 1/2" chuck with assist handle |
Click here to return to the Steffen
Stanley menu.
Click
here to send a request via E-Mail for more information or a price and
deliver quote
Copyright © 2000 Steffen Inc. All rights reserved.
Revised:
|
