SM21 DEWATERING PUMP
Pound for pound the SM21 will outpump any other pump available. The
SM21 does not require priming and can run dry without damage. The impeller
of the SM21 is within 3/4 of an inch of the base so the pump can remove
more liquids completely. Designed specifically for use in confined,
narrow openings, the SM21 can pump 300 GPM at a 10 foot head. Wear from
abrasive fluids is reduced because of the mixed flow type impeller.
The small size and low power requirements of the SM21 make it an affordable
alternative to large, heavy gas or electric pumps that can't match its
performance.
The SM21 is designed to run off a HTMA type
I or type II hydraulic circuit.
ITEM
|
U.S.A.
|
METRIC
|
|
Capacity
| 300 GPM
| 1125 LPM
|
| Weight
| 20 Pounds
| 9.1 kg
|
| Length
| 16 inches
| 40.6 cm
|
| Width
| 6.25 inches
| 16 cm
|
| Pressure
| 1000-2000 PSI
| 70-140 bar
|
| Flow Range
| 4-9 GPM
| 15-34 lpm
|
| Maximum Flow
| 9 GPM
| 34 lpm
|
| Porting
| 6 SAE O-Ring
| 6 SAE O-Ring
|
| Hose Whips
| 3/8" Male Pipe Thread End
| 3/8" Male Pipe Thread Ends
|
Model
|
Capacity
|
Order Number
|
|
SM21
|
300 GPM
|
SM21511
|
ACCESSORY PART NUMBERS
|
DESCRIPTION
|
| 2183
| 25' [8 M] OF 2-1/2" Fire Hose with Pin Lug Male x Female Coupler
|
| 2317
| Fire Nozzle - 1" Output
|
| 5133
| 2-1/2" Thread Adapter for Sump Pump to Fire Hose
|
| 5134
| 50' [15 M] Length of 2-1/2" Fire Hose with Pin Lug Male x Female
Coupler
|
| 5135
| Spanner Wrench for Pin Lug Coupler
|
While Stanley tools are very reliable they will eventually need service.
Using the proper tools and test equipment will save you time, effort
and frustration.
Part Number
|
Description
|
|
3189
| 20 gpm/75 lmp Flowmeter
|
| 4182
| Flow/Pressure Tester
|
Click here to return to the Steffen
Stanley menu. 
Click
here to send a request via E-Mail for more information or a price and
deliver quote
Copyright © 2000 Steffen Inc. All rights reserved.
Revised:
|
